ATSG Chrysler 45RFE Service Manual page 59

17. Install the input clutch molded rubber piston in
input clutch retainer as shown in Figure 77.
18. Install the input clutch piston return spring on
top of the input clutch piston (See Figure 77).
19. Install the spring retainer/balance piston, as
shown in Figure 77. The balance piston also
has a molded seal.
20. Using a suitable shop press, compress return
spring assembly and install the flat snap ring
into the groove. Refer to Figure 77 and snap
ring chart in Figure 71.
Continued on Page 60.
TAPERED EYELET
SNAP RING
Figure 76
AKPPHELP.RU Руководство по ремонту АКПП
Technical Service Information
INPUT CLUTCH RETAINER
AND OD/REVERSE PISTON
INPUT CLUTCH HUB
Copyright © 1999 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
4
3
2
1
1. INPUT CLUTCH STAMPED STEEL MOLDED RUBBER PISTON.
2. INPUT CLUTCH PISTON RETURN SPRING ASSEMBLY.
3. RETURN SPRING RETAINER AND BALANCE PISTON ASSEMBLY.
4. BAL ANCE PISTON RETAINING SNAP RING.
Figure 77
Copyright © 1999 ATSG
59