ATSG Chrysler 45RFE Service Manual page 38

1
2
3
4
5
6
1. NUMBER 6 THRUST BEARING.
2. REAR SELECTIVE THRUST PL ATE.
3. REACTION INTERNAL RING GEAR ASSEMBLY.
4. NUMBER 7 THRUST BEARING.
5. REACTION SUN GEAR.
6. NUMBER 8 THRUST BEARING.
38
AKPPHELP.RU Руководство по ремонту АКПП
Technical Service Information
Copyright © 1999 ATSG
Figure 40
AUTOMATIC TRANSMISSION SERVICE GROUP
33. Remove the number 6 thrust bearing if it is
present. It may have been stuck to the 2-4
retainer (See Figure 40).
34. Remove the rear selective plate as shown in
Figure 40.
35. Remove reaction internal ring gear assembly
as shown in Figure 40.
36. Remove the number 7 thrust bearing as shown
in Figure 40.
37. Remove the reaction sun gear as shown in
Figure 40.
38. Remove the number 8 thrust bearing as shown
in Figure 40.
39. Remove the reaction carrier/reverse sun gear
assembly as shown in Figure 41.
40. Remove the number 9 thrust bearing as shown
in Figure 41.
1
2
1. REACTION CARRIER/REVERSE SUN GEAR ASSEMBLY.
2. NUMBER 9 THRUST BEARING.
Figure 41
Copyright © 1999 ATSG