ATSG Chrysler 45RFE Service Manual page 64

2
1
1. NUMBER 4 THRUST BEARING ASSEMBLY.
2. REVERSE CLUTCH HUB ASSEMBLY.
64
AKPPHELP.RU Руководство по ремонту АКПП
Technical Service Information
Copyright © 1999 ATSG
Figure 83
AUTOMATIC TRANSMISSION SERVICE GROUP
INPUT CLUTCH HOUSING ASSEMBLY (Cont'd)
46. Install the number 4 thrust bearing into reverse
clutch hub, in the direction shown in Figure 83,
and retain with small amount of TransJel®.
47. Install the reverse clutch hub assembly into the
input housing over both shafts, as shown in
Figure 83.
48. Re-install the reverse clutch pack completely
as shown in Figure 80.
49. Install the number 5 selective thrust bearing on
the back side of reverse clutch hub as shown in
Figure 84 and retain with TransJel®.
50. Set the completed input housing assembly aside
for the final assembly process.
SELECTIVE THRUST BEARING
FOR FRONT END CLEARANCE
Figure 84
Copyright © 1999 ATSG