Purpose Of The Frequency Inverters; Transport And Storage; Handling And Installation - BONFIGLIOLI ACTIVE CUBE Applications Manual

1.2
Warning! The frequency inverters are electrical drive components intended for in-
1.3
The frequency inverters must be transported and stored in an appropriate way. Dur-
ing transport and storage the devices must remain in their original packaging. The
units may only be stored in dry rooms which are protected against dust and moisture
and are exposed to little temperature deviations only. Observe the climatic conditions
according to EN 50178 and the marking on the packaging. The frequency inverters
must not be stored for more than one year without connecting them to nominal vol-
tage.
1.4
Warning! Damaged or destroyed components must not be put into operation be-
The frequency inverters are to be used in accordance with the documentation as well
as the applicable directives and standards. They must be handled carefully and pro-
tected against mechanical stress. Do not bend any components or change the isolat-
ing distances. Do not touch any electronic components or contacts. The devices are
equipped with components which are sensitive to electrostatic energy and can easily
be damaged if handled improperly. Any use of damaged or destroyed components
shall be considered as a non-compliance with the applicable standards. Do not remove
any warning signs from the device.
4
4

Purpose of the Frequency Inverters

stallation in industrial plants or machines. Commissioning and start of
operation is not allowed until it has been verified that the machine meets
the requirements of the EC Machinery Directive 98/37/EEC and EN 60204.
In accordance with the CE marking requirements, the frequency inverters
also comply with the Low Voltage Directive 2006/95/EC as well as EN
50178/DIN VDE 0160 and EN 61800-2. The user shall be responsible for
making sure that the requirements of the EMC Directive 89/336/EEC are
met. Frequency inverters are only available at specialized dealers and are
exclusively intended for professional use as per EN 61000-3-2. The fre-
quency inverters are also marked with the UL label according to UL508c,
which proves that they also meet the requirements of the CSA Standard
C22.2-No. 14-95. The technical data, connection specifications and infor-
mation on ambient conditions are indicated on the name plate and in the
documentation and must be complied with in any case. Anyone involved
in any kind of work at the device must have read the instructions carefully
and understood them before starting the work.

Transport and Storage

Handling and Installation

cause they may be a health hazard.
Application Manual Electronic Gear
Application Manual Electronic Gear
09/08
09/08