General Safety Instructions And Information On Use; General Information - BONFIGLIOLI ACTIVE CUBE Applications Manual

1
The present documentation was prepared with great care and it was subjected to
extensive and repeated reviews. For reasons of clarity, it was not possible to include
all details of all the different types of the product in the documentation. Neither was it
possible to consider all conceivable installation, operation or maintenance situations. If
you require further information or if you meet with specific problems which are not
dealt with in sufficient detail in the documentation, contact your local BONFIGLIOLI
agent.
We would also like to point out that the contents of this documentation do not form
part of any previous or existing agreement, assurance or legal relationship. Neither
are they intended to supplement or replace such agreements, assurances or legal
relationships. The manufacturer's obligations are exclusively specified in the relevant
purchase contract. This contract also contains all and any warranty regulations which
may apply to the relevant scope of supply. These contractual warranty provisions are
neither extended nor limited by the specifications contained in this documentation.
The manufacturer reserves the right to correct or amend the specifications, product
information and omissions in these operating instructions without notice. The manu-
facturer shall not be liable for any damage, injuries or costs which may be caused by
the aforementioned reasons.
Warning! The specifications and instructions contained in the documentation must
1.1
Warning! The DC-link circuit of the BONFIGLIOLI VECTRON frequency inverter is
09/08
09/08

General Safety Instructions and Information on Use

be complied with strictly during installation and commissioning. Only qual-
ified staff who has read and understood the documentation is allowed to
carry out installation or commissioning work or to operate the devices.
The safety instructions must be complied with strictly. The term „Qualified
Staff" refers to anybody who is familiar with the installation, assembly,
commissioning and operation of the frequency inverter and has the prop-
er qualification for the job.

General Information

charged during operation, i.e. there is always the risk of contact with high
voltage. Frequency inverters are used for driving moving parts and they
may become hot at the surface during operation.
Any unauthorized removal of the necessary covers, improper use, wrong
installation or operation may result in serious injuries or material damage.
In order to avoid such injuries or damage, only qualified staff may carry
out the transport, installation, setup or maintenance work required. The
standards EN 50178, IEC 60364 (Cenelec HD 384 or DIN VDE 0100),
IEC 60664-1 (Cenelec HD 625 or VDE 0110-1), BGV A2 (VBG 4) as well as
the applicable national regulations must be complied with. The term
„Qualified Staff" refers to anybody who is familiar with the installation,
assembly, commissioning and operation of the frequency inverter as well
as the possible hazards and has the proper qualification for the job.
Application Manual Electronic Gear
Application Manual Electronic Gear
3
3