Offset Switches - BONFIGLIOLI ACTIVE CUBE Applications Manual

•
•
•
In this example, the default settings for
Min.
75% will result in a gear factor numerator of 1.1 and a reference frequency for the
Slave of 10 Hz ∗ 1.1 / 2 = 5.5 Hz.
Analog Factor Max.
Analog Factor Min.
4.4
Via the parameters
tional fixed frequencies which are added to the reference frequency. Digital signals at
the control inputs or internal logic signals can be assigned to the parameters. The
function is activated by these signals.
Note: While one of the offset switches is activated in operation mode "11 – fixed
Via the logic statuses of
Fixed Frequency 5
Offset Switch 1
0 = contact open, 1 = contact closed
09/08
09/08
Gear Factor Denominator
Set the
Set multifunction input MFI as an analog voltage input by adjusting
Mode
452 to "1 – voltage Input".
Reference Percentage Source
For the
tains MFI1A as a reference value source, e.g. operation mode "11 – +/- MFI1A +
FP".
688, an adjusted gear factor denominator of 2 and a reference percentage of
687 = 1.2
1.1
688 = 0.8
0%

Offset Switches

Offset Switch 1
with position control" for parameter
frequency is switched on, the position controller is switched off.
Offset Switch 1
485 and
Offset Switch 2
132
0
1
0
1
Application Manual Electronic Gear
Application Manual Electronic Gear
686 to the required value.
476, select an operation mode which con-
Analog Factor Max.
75% 100%
Reference Percentage Value
Offset Switch 2
132 and
Operation Mode
Offset Switch 2
132 and
Fixed Frequency 6
486.
Fixed Frequency Control
133 Function/active fixed value
0 no additional fixed frequencies active
Fixed Frequency 5
0
Fixed Frequency 6
1
Fixed Frequency 5
1
Fixed Frequency 6
+
Operation
Analog Factor
687 and
229
133, you can select addi-
689 and thus the fixed
133, you can select
485
486
485
486
15
15