Punching Holes In Copies ("Punch" Settings) - Konica Minolta bizhub C550 User Manual

2

Punching holes in copies ("Punch" settings)

!
Detail
In order for holes to be punched in the copies, all of the following conditions must be met.
The paper width must be between 280 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If a Punch setting is to be selected, select the orientation in which the document is positioned. If an
Original Direction setting is not selected, holes may not be punched in the copies as desired.
Note
The Punch settings are available only if the punch kit is installed on the optional finisher.
When Punch kit PK-512 is installed on Finisher FS-517/FS-608
Tray
Finishing Tray 1
When Punch kit PK-513 is installed on Finisher FS-517/FS-608
Tray
Finishing Tray 1
When Finisher FS-519 is installed
Paper weight
2
64 g/m to 209 g/m
2-64
Paper weight
2 2
64 g/m to 128 g/m
Paper weight
2 2
64 g/m to 128 g/m
Paper size
2
A3 w, A4 v, B5 v
Paper size
"4-Hole" Punch setting:
A3 w, B4 w, A4 v, B5 v, 11 e 17 w, 8-1/2 e 11 v,
7-1/4 e 10-1/2 v, 8K w, 16K v
Paper size
"4-Hole" Punch setting:
A3 w, B4 w, A4 v, B5 v
bizhub C650/C550/C451 (FE3)
Copy Operations