Tests and Adjustments
Adjustments
Figure 3-17
Equipment Setup 3 for the Receiver Adjustment
Receiver Characterization
This characterizes the receivers in your analyzer.
Procedure
1. Press UTILITY
System
2. Follow the instructions and prompts as they are displayed.
EE Default Adjustment
This sets the EEPROM data to their default values.
Procedure
1. Press UTILITY
System
2. Follow the instructions and prompts as they are displayed.
3-46
Service
Adjustments
, then
, then
Service
Adjustments
, then
, then
PNA Series Microwave Network Analyzers
, then click Receiver Characterization.
, then click EE Default Adjustment.
Service Guide N5227-90001
N5227A