PNA Series Microwave Network Analyzers
N5227A
Adjustments
These adjustments are firmware-driven tests that are used to fine-tune your analyzer.
If multiple adjustments are to be performed, perform them in the order listed.
•
"10 MHz Frequency Reference Adjustment" on page 3-40
•
"IF Gain Adjustment" on page 3-41
•
"Synthesizer Bandwidth Adjustment" on page 3-41
•
"Source Adjustment" on page 3-42
•
"Receiver Adjustment" on page 3-44
•
"Receiver Characterization" on page 3-46
•
"EE Default Adjustment" on page 3-46
These adjustments are described on the following pages.
Service Guide N5227-90001
Tests and Adjustments
Adjustments
3-39