Unpacking the MVME230x Hardware
Note
Unpack the equipment from the shipping carton(s). Refer to the
packing list(s) and verify that all items are present. Save the packing
material for storing and reshipping of equipment.
Avoid touching areas of integrated circuitry; static
!
discharge can damage these circuits.
Caution
Preparing the MVME230x Hardware
To produce the desired configuration and ensure proper operation
of the MVME230x, you may need to carry out certain modifications
before and after installing the modules.
The following paragraphs discuss the preparation of the
MVME230x hardware components prior to installing them into a
chassis and connecting them.
MVME230 x
The MVME230x provides software control over most options; by
setting bits in control registers after installing the MVME230x in a
system, you can modify its configuration. The MVME230x control
registers are briefly described in Chapter 4, with additional
information in the MVME2300-Series VME Processor Module
Programmer's Reference Guide as listed in the table Motorola Computer
Group Documents in Appendix A, Ordering Related Documents.
If the shipping carton(s) is/are damaged upon receipt,
request that the carrier's agent be present during the
unpacking and inspection of the equipment.
Unpacking the MVME230x Hardware
1
1-7