Motorola MVME2301 Installation And Use Manual page 3

The MVME2300-Series VME Processor Module Installation and Use manual provides
information you will need to install and use your MVME2300-series VME
processor module. The MVME2300 VME processor module is based on an
MPC603 or MPC604 PowerPC microprocessor, and features dual PCI Mezzanine
Card (PMC) slots with front panel and/or P2 I/O. The MVME2300 is currently
available in the following conÞgurations:
MVME2301
MVME2302
MVME2303
MVME2304
MVME2305
MVME2306
MVME2307
MVME2308
The MVME2300-series module is compatible with optional double-width or
single-width PCI Mezzanine Cards (PMCs) , and the PMCspan PCI expansion
mezzanine module. By utilizing the two onboard PMC slots and stacking
PMCspan(s), the MVME2300 provides support for up to six PMCs.
This manual includes hardware preparation and installation instructions for the
MVME2300-series module, information about using the front panel, a functional
description, information about programming the board, using the PPCBug
debugging Þrmware, and advanced debugger topics. Other appendices provide
the MVME2300-series speciÞcations, connector pin assignments, and a glossary of
terms. Additional manuals you may wish to obtain are listed in Appendix A,
Ordering Related Documentation.
The information in this manual applies principally to the MVME2300-series
module. The PMCspan and PMCs are described brießy here but are documented
in detail in separate publications, furnished with those products. Refer to the
individual product documentation for complete preparation and installation
instructions. These manuals are listed in Appendix A, Ordering Related
Documentation.
Model
MPC603
@ 200 MHz
MPC604
@ 300 MHz
Preface
MPC
16MB ECC DRAM
32MB ECC DRAM
64MB ECC DRAM
128MB ECC DRAM
16MB ECC DRAM
32MB ECC DRAM
64MB ECC DRAM
128MB ECC DRAM
Memory