Motorola MVME2301 Installation And Use Manual page 98

ENV - Set Environment
6
6-6
NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N] = N?
Give boot priority to devices deÞned in the fw-
Y
boot-path global environment variable (GEV).
Do not give boot priority to devices listed in the
N
fw-boot-path GEV. (Default)
Note When enabled, the GEV (Global Environment
Variable) boot takes priority over all other boots,
including Autoboot and Network Boot.
NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N?
Give boot priority to devices deÞned in the fw-
Y
boot-path GEV at power-up reset only.
Give power-up boot priority to devices listed in
N
the fw-boot-path GEV at any reset. (Default)
NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay = 5?
The time in seconds that a boot from the NVRAM boot list will
delay before starting the boot. The purpose for the delay is to
allow you the option of stopping the boot by use of the
key. The time value is from 0-255 seconds. (Default = 5 seconds)
Auto Boot Enable [Y/N]
The Autoboot function is enabled.
Y
The Autoboot function is disabled. (Default)
N
Auto Boot at power-up only [Y/N] = N?
Autoboot is attempted at power-up reset only.
Y
Autoboot is attempted at any reset. (Default)
N
= N?
BREAK