Motorola MVME2301 Installation And Use Manual page 101

ROM Boot at power-up only [Y/N] = Y?
ROMboot is attempted at power-up only.
Y
(Default)
ROMboot is attempted at any reset.
N
ROM Boot Enable search of VMEbus [Y/N] = N?
VMEbus address space, in addition to the usual
Y
areas of memory, will be searched for a
ROMboot module .
VMEbus address space will not be accessed by
N
ROMboot. (Default)
ROM Boot Abort Delay = 5?
The time in seconds that the ROMboot sequence will delay
before starting the boot. The purpose for the delay is to allow
you the option of stopping the boot by use of the
time value is from 0-255 seconds. (Default = 5 seconds)
ROM Boot Direct Starting Address = FFF00000?
The Þrst location tested when PPCBug searches for a ROMboot
module. (Default = $FFF00000)
ROM Boot Direct Ending Address = FFFFFFFC?
The last location tested when PPCBug searches for a ROMboot
module. (Default = $FFFFFFFC)
Network Auto Boot Enable [Y/N] = N?
The Network Auto Boot (NETboot) function is
Y
enabled.
The NETboot function is disabled. (Default)
N
Network Auto Boot at power-up only [Y/N] = N?
NETboot is attempted at power-up reset only.
Y
NETboot is attempted at any reset. (Default)
N
Modifying the Environment
key. The
BREAK
6
6-9