Alarms And The Error Log; Viewing Alarms - Husky Altanium Neo2 User Manual

User Guide
Table 9-4
Manual
Time
----
----
----
Remote Boost can be cancelled at any time by touching BOOST or STOP buttons.
9.5

Alarms and the Error Log

Neo2 Alarms Status screen allows the operator to view the status of each zone and reset any
alarms that occur in the system.

9.5.1 Viewing Alarms

To view alarms:
1.
Alarms and the Error Log
v 1.4 — September 2015
Remote Boost Operational Description (Continued)
Delay Remote
Time Time
X:XX:XX X:XX:XX
X:XX:XX 0:00:00
---- ----
On the Home screen, touch ALARM STATUS.
Input
Operation - Boost Button Select
Mode
ON/OFF System delays for specified time and then enters
Boost until the input signal is not active or the
timer expires.
ON/OFF System delays for specified time and then enters
Boost until the signal is not active.
Direct System enters Boost until the input signal is not
active. If the input signal is active when the system
is started, it will immediately go into Boost mode.
System Setup and Customization
77