Chapter 6 Mold Setups - Husky Altanium Neo2 User Manual

User Guide

Chapter 6 Mold Setups

Depending on how the system is configured (Refer to
button in the Security screen will display the Mold Setup screen. In this screen allows the
operator to choose from 24 individual mold setups to heat up your mold. If this screen is not
configured to be displayed on power up, then it can be accessed from the Home Screen.
Figure 6-1 Mold Setup Screen
LOAD
DEFAULT
COPY
PASTE
NAME
OK
v 1.4 — September 2015
Function
Touch this button to load the highlighted mold setup into the system.
You must have a mold setup loaded before you can heat up the mold.
Touch this button and it will return all settings on the highlighted mold
setup to the default values. For safety reasons the system will not allow
the presently loaded mold setup to return to default values.
Touch this button to make a copy of an existing mold setup in a different
location.
Touch this button to copy the existing mold setup in a different location.
Touch this button to name or rename a mold setup. The maximum
number of characters allowed is 10.
Touch this button to exit out of the Mold Setup screen.
Chapter 5–Security), touching the OK
Description
Mold Setups
31