Displaying Zone Parameters - Husky Altanium Neo2 User Manual

Figure 9-7 System Customize Screen
1. Parameters Buttons 2. Next Page Button

9.3.1 Displaying Zone Parameters

The first three rows on the Customize screen are the zone parameters that can be selected to
display on the Quick Set screen. These zone parameters can be assigned to either the Basic
mode button or the Advanced mode button. Doing so modifies the number of zone
parameters that will be displayed in the Quick Set screen when in Basic or Advanced modes.
70
v 1.4 — September 2015
2
Displaying Zone Parameters
Altanium Neo2
1 1