Importing And Exporting Mold Setups; Importing A Mold Setup - Husky Altanium Neo2 User Manual

6.5

Importing and Exporting Mold Setups

The Mold Setup Import/Export screen is used to import and export mold setups to and from
the system. This screen only appears if a USB disk is connected to the USB port.
Figure 6-3 Mold Setup Import/Export Screen

6.5.1 Importing a Mold Setup

To import a mold setup:
1.
2.
3.
4.
5.
34
v 1.4 — September 2015
Insert a USB disk to the USB port.
On the Mold Setup Import/Export screen, touch the Mold Setup number from the USB
MOLD SETUPS list to select the mold setup file you want to import.
Touch COPY. Once selected the COPY button is greyed out and the number button for
the selected setup turns magenta and a C replaces the number.
Touch the Mold Setup number in the INTERNAL MOLD SETUPS list to select the
destination mold setup file location.
Touch PASTE and the file is copied to the new destination.
Altanium Neo2
Importing and Exporting Mold Setups