Adjusting Basic Parameters; Changing A Setpoint - Husky Altanium Neo2 User Manual

User Guide
7.2

Adjusting Basic Parameters

This section describes how to adjust the basic parameters, turn zones on and off and to set
the manual boost and standby settings.

7.2.1 Changing a Setpoint

Temperatures of the heaters must be specified. The default setting is 177 °C (350 °F).
To change a setpoint:
1.
2.
Figure 7-6 Quick Set Screen with Zone 1 Selected
1. Zone Number 2. Selected Zone 3. Current Parameter Value 4. Parameter Type
5. Parameter Scroll Buttons 6. Select All Button 7. Clear All Button 8. Block Button
3.
Adjusting Basic Parameters
v 1.4 — September 2015
On the Quick Set screen, touch the zone to adjust.
To select more than one zone, touch the additional zones and they will be selected.
Using the Parameter Scroll buttons, scroll to SETPOINT.
Touch SETPOINT and the numerical key window appears.
Making Adjustments
41