Table of Contents
Advertisement
User Guide
Chapter 4 Neo2 Operator Interface
This section describes the fundamental operating procedures of the Altanium/Neo2 hot
runner process controller.
The interface between the user and the Altanium/Neo2 is a color LCD Display with a Touch
Screen. This display is referred to as Neo2 for the remainder of this guide. All software
functions of the system are accessed by touching buttons on the screen.
CAUTION!
Mechanical hazard - risk of damage to the equipment. Use a finger to operate the touch
screen. Do not use a screwdriver, pen, or any other tool to touch the screen as this could
cause damage to the touch screen on Neo2.
4.1
Overview
Neo2 comes standard with a high-resolution color display. This offers the advantages of high
definition and a wide viewing angle, even in adverse lighting conditions.
During general operation the controller will display up to 48 zones of information on this
screen.
Overview
v 1.4 — September 2015
Neo2 Operator Interface
15
Hide quick links:
Advertisement
Table of Contents
