Step 2.
Connect the cable on the system board.
Step 3.
Align the light path diagnostics panel with the bracket.
Step 4.
Press the light path diagnostics panel securely in the bracket.
After you install the light path diagnostics panel, complete the following steps:
1. Install the cover onto the compute node (see "Installing the compute node cover" on page 644 for
instructions).
2. Install the compute node into the chassis (see "Installing a compute node in a chassis" on page 639
for instructions).
Removing the RFID tag
Use this information to remove the RFID tag from the bezel.
Before you remove the RFID tag, read "Safety" on page iii and "Installation guidelines" on page 637.
To remove the RFID tag, complete the following steps.
670
Flex System x220 Compute Node Installation and Service Guide