Lenovo Flex System x220 Installation And Service Manual page 587

Compute node
Hide thumbs Also See for Flex System x220:
Table of Contents

Advertisement

816f0a0c-200bffff : An Over-Temperature Condition has been removed on the memory device
11 in Group 1 on Subsystem System Memory.
The DIMM in DIMM connector 11 is no longer in an overtemperature condition.
May also be shown as 816f0a0c200bffff or 0x816f0a0c200bffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Temperature
SNMP Trap ID
0
CIM Information
Prefix: PLAT ID: 0147
User Response
Information only; no action is required.
816f0a0c-200cffff : An Over-Temperature Condition has been removed on the memory device
12 in Group 1 on Subsystem System Memory.
The DIMM in DIMM connector 12 is no longer in an overtemperature condition.
May also be shown as 816f0a0c200cffff or 0x816f0a0c200cffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Temperature
SNMP Trap ID
0
CIM Information
Prefix: PLAT ID: 0147
User Response
Information only; no action is required.
• 816f0a13-0301ffff : Bus [SensorElementName] has recovered from a Fatal Bus Error.
.
Chapter 6
Troubleshooting
579

Advertisement

Table of Contents
loading

Table of Contents