Lenovo Flex System x220 Installation And Service Manual page 318

Alert Category
Warning - Other
SNMP Trap ID
60
CIM Information
Prefix: PLAT ID: 0520
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
• 80070114-2201ffff : Sensor [SensorElementName] has transitioned from normal to non-critical
state.
This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 800701142201ffff or 0x800701142201ffff
Severity
Warning
Serviceable
Yes
Automatically notify support
No
Alert Category
Warning - Other
SNMP Trap ID
60
CIM Information
Prefix: PLAT ID: 0520
User Response
This is a UEFI detected event. To find the UEFI diagnostic code for this event, in the information
center, follow the instructions in "Finding the UEFI diagnostic code" under "UEFI diagnostic
codes." Then, in the information center, open the topic for the UEFI diagnostic code and follow the
instructions under "User response."
• 80070201-3101ffff : Sensor PCIE 1 Overtemp has transitioned to critical from a less severe state.
The temperature of the PCI expansion unit PCIe Card1 has exceeded its specified threshold.
May also be shown as 800702013101ffff or 0x800702013101ffff
Severity
Error
Serviceable
310
Flex System x220 Compute Node Installation and Service Guide