Screws
c.
Twist the handle on the installation tool clockwise and lift the microprocessor out of the socket.
Screws
If you are instructed to return the microprocessor and heat sink, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Installing a microprocessor and heat sink
Use this information to install a microprocessor and heat sink.
Note: This procedure should be performed only by trained service technicians.
Before you install a microprocessor and heat sink, complete the following steps:
1. Read "Safety" on page iii and "Installation guidelines" on page 637.
2. If the compute node is installed in an Flex System chassis, remove it (see "Removing a compute node
from a chassis" on page 639 for instructions).
678
Flex System x220 Compute Node Installation and Service Guide
Installation tool
Microprocessor