Chapter 13
13. PS/2-Mouse Interface
The Sup
er I/O of the MOPSlcdLX supports a PS
13.1
Connector
The PS/2 m
ouse interface is available on Connector X14001 (4pins). An adapter cable is required to connect
a standard
PS/2 mouse. The cable is available from Ko
00-0).
The following tab
le shows the pinout and connections for a PS/2 mouse adapter.
Header
Note:
To protect the external power lines of peripheral devices, make sure that
1
- the wires have the ri
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
To fin
d the location of the PS/2 mouse
"Connector Layout".
Kontron User's Guide MOPSlcdLX
/2 mouse.
Pin
Signal Name
1
MSDAT
2
(1)
VCC
3
GND
4
MSCLK
ght diameter to withstand the maximum available current.
connector on the MOPSlcdLX board, please see the Appendix
27
ntron (KAB-MOUSE-PS2, Part Number 96062-0000-
Function
6 pin MiniDIN PS/2
Mouse data
+5V
Ground
Mouse clock
PS/2-Mouse Interface
1
4
3
5