Watchdog Timer; Programming; Initialization; Trigger - Kontron MOPSlcdLX User Manual

Chapter 21

21. Watchdog Timer

The watchdog timer of the MOPSlcdLX can issue a reset to the system. The watchdog timer circuit has to be
triggered within a specified time by the application software. If the watchdog is not triggered because
proper software execution fails or a hardware malfunction occ

21.1 Programming

21.1. 1 In itialization
You ca n in alize the watchdog timer from the BIOS Setup. You also can set up the iti
application software with help of the JIDA (J
face.
21.

1.2 Trigger

The watchdog needs to be triggered out
can only do this in the application softwa
grammer's interface.
For in formation about the JIDA pr
Web si te.
Kontron User's Guide MOPSlcdLX
umptec Intelligent Device Architecture) programmer's inter-
of the application software within a specified timeout period. You
re by using low-level programming or with help of the JIDA pro-
ogrammer's interface refer to the JIDA software packages on the Kontron
37
urs, it will reset the system.
initialization from the
Watchdog Timer