Table of Contents
Advertisement
Chapter 9
9.4
Connecting a LCD Panel
To determine whether your panel display is supported, check the Kontron Web site for panel lists. We regu-
larly update the list of panels that have been tested with the MOPSlcdLX.
If you use one of those adapters supplied by Kontron, configuration is easy:
‚
Check whether you have the correct adapter an
the cable for damages.
ƒ
Disconnect the power from your system.
„
Connect the panel adapter to the LCD Panel connector (JILI interface) on the MOPSlcdLX.
…
Connect the other end of the cable to your display.
†
Connect the backlight converter.
‡
Supply power to your system.
ˆ
If no image appears on your display, connect a CRT monitor to the CRT connector.
‰
If necessary program the EEPROM on the JILI cable with the matching configuration data.
Š
If you still do not see improvement, consider contacting the dealer for technical support.
9.5
Availabl
e Video Modes
The following list shows the vide
size. When configured for saller frame buffers and/or using a LCD panel on the JILI interface, not all of the
video modes listed below may be available. Capability depends on system configuration and on display
capabilit
ies.
Different operating systems also may not support all listed modes by the available drivers.
9.5.1
Standard IBM
Video Mode
00h/01h
02h/03h
04h/05h
06h
07h
0Dh
0Eh
0Fh
10h
11h
12h
13h
Kontron User's Guide MOPSlcdLX
o modes supporte
d by the graphics controller with maximum frame buffer
-Compatible VGA Modes
Type
Characters/Pixels
Text
Text
Graphics
Graphics
Text
Graphics
Graphics
Graphics
Graphics
Graphics
Graphics
Graphics
18
d cable for the panel you plan to use. Inspect
Colors
40x25
16
80x25
16
320x200
4
640x200
2
80x25
Mono
320x200
16
640x200
16
640x350
Mono
640x350
16
640x480
2
640x480
16
320x200
256
Graphics Interface
Advertisement
Table of Contents
