7.10 Working With The Current Settings Screen; Defining Stop Sample Criteria - Beckman Coulter Cell Lab Quanta SC Instructions For Use Manual

SOFTWARE
WORKING WITH THE CURRENT SETTINGS SCREEN

7.10 WORKING WITH THE CURRENT SETTINGS SCREEN

When you select
(Figure 5.12) appears. This screen allows you to define many settings as defined in the
following procedures.

Defining Stop Sample Criteria

r
Defining the Concentration (Use, # of Seconds, and Start Time)
r
Enabling/Disabling Checkboxes
r
Defining Auto Save Options
r
Customizing an Excel Report
r
Defining Filter Configurations
r
For additional information, see
Defining Stop Sample Criteria
Perform this procedure to define how much sample will be run through the instrument and to
define the end of the run. When any of the defined criteria is met, sample analysis stops and
the system automatically performs any selected Auto Save Options.
1
Current Settings
2
Define the Stop Sample Criteria.
For details about the options for
defining the end of the sample, see
Understanding the Current Instrument
Settings
3
Set
7-64
from the Main menu, the Current Setting screen
Current Settings
Understanding the Current Instrument Settings
.
Screen.
.
Screen.
PN 721742AD