1
Prepare the required QC materials, refer to
instructions
2
Load the Optical Alignment protocol, refer to
Quanta SC manual.
3
Place an empty sample cup on the
instrument.
4
Rinse
5
After rinse is completed, place sample cup containing QC material on the instrument
and
Note: Ensure count rate is greater than 100.
If using Laser Alignment Protocol, run a sample of Flow-Check beads.
r
If using Arc Lamp Alignment Protocol, run a sample of alignment beads.
r
PN 721742AD
from the Main screen.
Start.
AUTOMATICALLY ALIGNING THE OPTICS
Heading 8.3, DAILY QC
Loading Protocols
in Chapter 7 of the
QUALITY CONTROL
for detailed
8-5
8
Need help?
Do you have a question about the Cell Lab Quanta SC and is the answer not in the manual?