Physical Specifications; Electrical Specifications; Technical Specifi Cations - Carel PRK300L3FK User Manual

2.2 Technical specifi cations
2.2.1 Physical specifi cations
SMALL
Dimensions MEDIUM, LARGE,
BUILT-IN DRIVER
Assembly
Material
Flammability
Plastic case
Ball pressure test
Resistance to creeping current
Colour
Built-in terminal PGD1 (132x64 pixel) with backlit keypad
Operating conditions
Storage conditions
Ingress protection
Environmental pollution
Other features Class according to protection against electric shock
PTI of the insulating materials
Period of stress across the insulating parts
Type of action
Type of disconnection or microswitching
Heat and fi re resistance category
Ageing characteristics (operating hours)
Number of automatic operating cycles
Overvoltage category
2.2.2 Electrical specifi cations
Power supply SMALL, MEDIUM, LARGE: use a dedicated 50 class II safety transformer VA.
BUILT IN DRIVER: use a dedicated 100 VA class II safety transformer.
SMALL
MEDIUM
LARGE
(EXTRALARGE)
BUILT-IN DRIVER
(DRIVER VALVE INTEGRATED)
Important: only power "PRK300TD***" with alternating current. The power transformer secondary must be earthed.
Terminal block with male/female plug-in connectors
Cable cross-section min 0.5 mm
CPU 32 bit, 100 MHz
Non-volatile memory (FLASH) 2 M byte Bios + 11 Mbyte application program
Data memory (RAM) 3.2 Mbyte (1.76 Mbyte Bios + 1.44 Mbyte application program)
T buff er memory (EEPROM) 13 kbyte
P parameter memory(EEPROM) 32 kbyte (not available to the pLAN)
Clock with battery standard, precision 100 ppm
Battery CR2430 3 Vdc lithium button battery (size 24x3 mm)
Software class and structure Class A
Category of immunity to voltage Category III
surges (EN 61000-4-5)
Device not designed to be hand-held when powered
Vac
24 Vac (+10/-15%),
50/60 Hz protected
by an external 2.5 A
type T fuse
2 2
- max 2.5 mm
13 DIN modules 110 x 227,5 x 60 mm
18 DIN modules 110 x 315 x 60 mm
18 DIN modules 110 x 315 x 75 mm
fi tted on DIN rail in accordance with DIN 43880 CEI EN 50022
technopolymer
V2 (UL94) and 850 °C (in accordance with IEC 60695)
125 °C
≥ 250 V
White RAL 9016
PRK300*3**, PRK300*0**(w/o built-in terminal): -40T70 °C, 90% RH non-condensing(*)
PRK300*3*0 (with built-in terminal): -20T60 °C, 90% RH non-condensing
(*) with Ultracap module fi tted: -40T60°C
PRK300D*** (w/o built-in terminal): -40T70 °C, 90% RH non-condensing
PRK300D*** (with built-in terminal): -30T70 °C, 90% RH non-condensing
Models with USB port and/or with Ultracap module: IP20 on the front panel only
Models without USB port and without Ultracap module: IP40 on the front panel only
2
to be integrated into Class I and/or II appliances in the versions without valve driver,
class I in the versions with valve driver
PCB: PTI 250 V; insulating material: PTI 175
long
1C; 1Y for SSR versions
microswitching
Category D (UL94-V2)
80,000
100,000 (EN 60730-1); 30,000 (UL 873)
category II
P (Vac) Vdc
45 VA 28 to 36 Vdc
(-20/+10%) protected
by an external 2.5 A
type T fuse
90 VA
11
ENG
Tab. 2.d
P (Vdc)
30 W
Not allowed
Tab. 2.e
pRack +0300025EN rel. 1.3 - 17.12.2015