Manual Upload; Download - Carel PRK300L3FK User Manual

ENG
pGD
NO LINK
5. The test phase starts.
pGD
6. The controller warns that no application has been loaded.
pGD
7. The application update then starts.
pGD
pRack +0300025EN rel. 1.3 - 17.12.2015
Fig. 10.m
Fig. 10.n
Fig. 10.o
Fig. 10.p
Fig. 10.q
Fig. 10.r
Fig. 10.s
8. Remove the pendrive. The update is complete. Wait for the display to
stop fl ashing, indicating that the controller is being reset before
restarting.
pGD
Important: As can be seen, when updating the BIOS and the
application, the pGDE terminal shows the message "NO LINK", meaning
that no connection is established. Do not remove the terminal and wait
for the end of the update procedure, when the pGDE terminal replicates
the messages on the built-in display.
Note: Autorun run is especially useful in those cases in which the
same operation needs to be performed on several controllers. For
example, to load diff erent applications on controllers connected in a
pLAN network, only one autorun fi le needs to be created; this uploads
the various directories contained on the pendrive based on the address
of the controllers. The controller with address XY will only load the
directory called "nomedir_XY" ["DirName_XY"]. The pendrive then only
needs to be plugged into each controller to run the upload, confi rming
from the shared terminal.

10.3.5 Manual upload

To manually upload the contents of the pendrive the user must access
the management menu from the system screens, selecting UPLOAD and
then MANUAL. The fi les are selected by pressing ENTER when the cursor
is on the desired fi le name. A selected fi le is marked by the symbol "*"
on the left. Once the fi les have been selected (all in the same directory),
press PRG to start the upload. To display the contents of a directory press
ENTER. To go up one directory level press ESC. Once the upload has
started, the messages shown on the screen are the same as in automatic
and autorun mode.

10.3.6 Download

As mentioned above, the DOWNLOAD operation can be managed in two
ways:
1. Manual mode: follow the steps described in the paragraph
"Automatic upload" and select manual operation. Then each fi le
must be selected and downloaded.
2. Autorun mode: prepare a fi le called "autorun.txt", containing a string
that identifi es the function to be performed.
Function
DOWNLOAD the application
DOWNLOAD non-volatile memory
DOWNLOAD the entire contents of
the pRack
The result is the creation of fi les with the required extensions, which will
be placed in the respective directories as described in the paragraph "File
names". When the operation is completed, the display shows a message
with the name of the directory created.
[FUNCTION]
Download application
82
Fig. 10.t
Fig. 10.u
String
Download application
Download non volatile memory (.dev)
Copy pRack download