Dup Offset 144M; Dup Offset 430M; One Touch Repeater; Auto Repeater - Icom IC-7000 Instruction Manual

Miscellaneous (others) Set mode

13 DUP Offset 144M

This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for an 144 MHz band only.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.

14 DUP Offset 430M

This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for the 430 MHz band. only
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.

15 One Touch Repeater

This item turns the one touch repeater function ON
(DUP-, DUP+) and OFF.
When [F-2 DUP] (M-3) is held down for 1 second, the
selected offset direction and programmed duplex off-
set frequency (depending on the operating frequency
band) is set with the displayed frequency.

16 Auto Repeater

This item turns the auto repeater function ON-1
(auto duplex setting), ON-2 (auto duplex setting and
activating tone encoder) or OFF.
See page 65 for details concerning the auto repeater
function.

17 Tuner (Auto Start)

ANTENNA TUNER
The optional AT-180
matic start capability which starts tuning if the SWR
is higher than 1.5–3:1.
When "OFF" is selected, the tuner remains OFF
even when the SWR is poor (1.5–3:1). When "ON" is
selected, automatic tune starts even when the tuner
is turned OFF.
(continued)
DUP-
Minus offset direction is se-
lected. (default)
ON-1
Auto duplex setting is ON.
(default)
ON
has an auto-
Automatic tune function is
ON.
Even when "ON" is selected, automatic tune does
not start for the 50 MHz band.
SET MODE
0.600MHz
0.6 MHz offset (default)
5.000MHz
5 MHz offset (default)
OFF
One touch repeater function
is OFF.
OFF
Auto repeater function is
OFF.
OFF
Automatic tune function is
OFF. (default)
13
13
130