5
FUNCTIONS FOR RECEIVE
This DSP-based simple band scope allows you to
display conditions on the selected band, as well as
relative strength of signals. The IC-7000 has two
modes for the spectrum indication—one is fix mode,
and another one is center mode.
NOTE: The IC-7000's simple band scope can
monitor the displayed frequency during sweeping.
Both the receving and sweeping functions use the
same receive circuits which must switch at high
speed. This switching sound may be irritating to
listen to. If so, set the desired monitoring sound,
"FAST Sweep Sound," or change the fast
sweep setting, "FAST Sweep," in the scope Set
mode (p. 72).
BAND
Hold down [Y(
simple band scope ON or OFF.
[Z(
MENU / GRP
69
)] for 1 second to turn the
)] also to turn OFF.
[ ]
[MENU/GRP]
Select G-1 (Scope).
[MENU/GRP] for 1 second once or twice
to select the menu group G (Graphic).
[MENU/GRP] momentarily one or more times
to select the menu G-1 (Scope).