Notch Function; D Auto Notch Function - Icom IC-7000 Instruction Manual

This transceiver has auto and manual notch
functions. The auto notch function automatically
attenuates beat tones, tuning signals, etc., even if
they are moving. The manual notch can be set to
attenuate a frequency via the manual notch filter Set
mode.
D
The auto notch can be used in SSB, AM and FM
modes.
Push [ANF/• REC] momentarily to turn the
automatic notch function ON or OFF.
" appears when auto notch function is in use.
Auto notch OFF
Desired
signal (AF)
Unwanted interference
Auto notch ON
Desired
signal (AF)
Interference frequency
is attenuated
FUNCTIONS FOR RECEIVE
While in SSB and AM modes, push [ANF/• REC]
or [MNF/ADJ] to toggle the notch function
between auto, manual and OFF.
activated at the same time.
While in CW and RTTY modes, push [MNF/ADJ]
to toggle the manual notch function ON and OFF.
While in FM mode, push [ANF/• REC] to toggle
the auto notch function ON and OFF.
" appears when auto notch function is in use.
" appears when manual notch function is in use.
page.
Appears
[ANF/ REC]
5
5
80