D Cw Reverse Mode; D Cw Side Tone Function - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT
D
The CW-R (CW Reverse) mode receives CW signals
on the reverse sideband like that of LSB and USB
modes.
Use when interference is near the desired signal and
you want to change the interference tone.
q Push [MODE] momentarily several times to select
CW mode.
w Hold down [MODE] for 1 second to select CW or
CW-R mode.
D
When the transceiver is in receive condition (and
the break-in function is OFF— p. 85) you can listen
to the tone of your CW signal without actually
transmitting.
This allows you to spot your transmit signal exactly
to another station's. This also convenient for CW
practice.
q When CW (CW-R) mode is selected, enter the
quick Set mode.
[AF( SET )] momentarily to enter the Set mode
menu.
[F-1 QS] to enter the quick Set mode.
w Push [F-1 ≤] or [F-2 ≥] several times to select
"Side Tone Level," then rotate [DIAL] to
adjust the side tone level.
e Push [Z(
MENU/GRP
[Z( MENU
operating mode.
43
)] to exit the quick Set mode.
/
GRP )] again to return the normal
[MODE]
600 Hz
Push
for 1 sec.
inteference BFO
signal
[AF]
[MENU/GRP] [F-1] [F-2]
600 Hz
inteference signal
BFO
[DIAL]