Noise Reduction; D Noise Reduction Set Mode; Nr Level - Icom IC-7000 Instruction Manual

5
FUNCTIONS FOR RECEIVE
The noise reduction function enhances desired
signals in the presence of noise by using the DSP
circuit. The amount of enhancement is adjustable.
Push [NR/LEV] momentarily to toggle the noise
reduction ON and OFF.
" indicator appears when the NR function is ON.
The noise reduction level can result in audio signal
masking. Set the noise reduction level for maximum
readability as described below.
D
q Hold down [NR/LEV] for 1 second to enter the
noise reduction level Set mode.
w Rotate [DIAL] to adjust the noise reduction level.
[F-4 DEF] for 1 second to return to default
level.
e Push [NR/LEV] (or push [Z(
the noise reduction level Set mode.

NR Level

This item adjusts the noise reduction level. The noise
reduction level can be adjusted from 0 to 15.
79
MENU/GRP )]) to exit
Appears
[MENU/GRP] [F-4] [NR/LEV]
Noise reduction OFF
NR NR Level
0
Noise components
4 (default)
[DIAL]
Noise reduction activated
NR NR Level
5
Desired
signal (CW)
4