D Setting A Memory Channel As A Select Memory; D Selecting A Memory Bank - Icom IC-7000 Instruction Manual

D
Select memory channels are used for select memory
scan. Select memory scan repeatedly scans the
select memory channels only. This is useful to speed
up the memory scan interval. Of course, select
memory channels are also scanned during normal
memory scan.
q Select the memory channel list as described at left.
w Push
RIT] momentarily to select the
M-ch/RIT function, if the twin PBT is selected.
indicator (Green) goes out.
e Rotate
(inner) control to select the desired
memory channel.
selected.
[Y]/[Z] on the microphone also changes the channels.
r Push [F-1 SEL] to set the memory channel as a
select memory or not.
t Repeat steps e to r to program another memory
channel as a select memory channel, if desired.
y Push [Z(
MENU/GRP
)] twice to exit the memory
channel list.
Setting select memory channels is also possible
in the memory scan indication. (p. 113)
D
The IC-7000 has a total of 5 memory banks (99
memory channel each), A to E, available for usage
by group, etc.
q Select the memory channel as described at p.
100.
w Push
RIT] momentarily to select the
M-ch/RIT function, if the twin PBT is selected.
indicator (Green) goes out.
e Rotate [RIT] (outer) control to select the desired
memory bank.
[MENU/GRP]
[RIT] (outer) control
Bank indication
[F-4]
MEMORY OPERATION
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-1]
"ß" appears for select memory channel.
Push [F-1 SEL]
q Select the memory channel list as described at
left.
w Push [F-4 BNK] several times to select the
desired memory bank.
[RIT] (outer) control also changes the bank.
e Push [Z(
MENU/GRP
)] twice to exit the memory
channel list.
8
8
Bank indication
Push
104