Automatic Acknowledgement; Offset Time - Icom IC-M412 Instruction Manual

6
DSC OPERATION
n Automatic acknowledgement
This item sets the automatic acknowledgement function ON
or OFF.
When a position request or polling request call is received,
transceiver automatically transmits a position request reply
or polling reply call, respectively.
q Push [MENU] to enter the DSC menu.
w Push [s] or [t] to select "AUTO ACK," and push [ENT].
e Push [s] or [t] to turn the automatic acknowledgement
function ON or OFF.
r Push [ENT] to set the condition.
• Push [CLR] to cancel and exit the condition.
42
n Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [MENU] to enter the DSC menu.
w Push [s] or [t] to select "OFFSET TIME," and push
[ENT].
Scrolls
e Set the offset time from the UTC (Universal Time Coordi-
nated) time using [s] or [t].
• Push [CH/WX] or [16] to move the cursor forward or backward,
respectively.
• Push [CLR] to cancel and exit the condition.
r Push [ENT] to program and to exit the condition.
The local time indication is not available when the GPS
receiver (sentence formatter RMC) is connected, the
transceiver's display indicates UTC time only.
Scrolls