D Functions For The Rtty Decoder Indication; D Setting The Decoder Threshold Level - Icom IC-7000 Instruction Manual

D
[MENU/GRP] [F-1] [F-2]
RTTY tuning meter
D
Adjust the RTTY decoder threshold level if some
characters are displayed when no signal is received.
[MENU/GRP] [F-3] [F-4] [DIAL]
RECEIVE AND TRANSMIT
The transceiver has an RTTY decoder for Baudot
(mark freq.: 2125 Hz, shift freq.: 170 Hz, 45 bps).
An external terminal unit (TU) or terminal node
controller (TNC) is not necessary for receiving a
Baudot signal.
q Push [MODE] momentarily to select RTTY mode.
second to toggle between RTTY and RTTY-R modes.
w Select S-1.
[MENU/GRP] for 1 second once or twice
to select the menu group S.
[MENU/GRP] momentarily one or more times
to select the menu S-1.
e Push [F-2 DEC] momentarily to turn the RTTY
decoder ON.
are displayed in the RTTY decoder screen.
r Push [F-1 HLD] momentarily to freeze the current
screen.
H" appears while the function is in use.
t Push [Y(
MENU/GRP
)] to toggle the normal or wide
screen space.
y Hold down [F-1 HLD] for 1 second to clear the
displayed characters.
u Push [Z(
MENU/GRP )] to exit the RTTY decoder
screen.
The transceiver has an RTTY tuning iindicator to
make correct tuning easier.
The RTTY tuning meter is automatically displayed
when the RTTY decoder is turned ON.
q Call up the RTTY decoder screen as described
above.
w Push [F-3 ADJ] to select the threshold level
setting condition.
e Rotate [DIAL] to adjust the RTTY decoder
threshold level.
[F-4 DEF] for 1 second to select the
default condition.
r Push [Z(
MENU/GRP
)] to exit the RTTY decoder
screen.
The UnShift On Space (USOS) function and new
line code can be set in the RTTY decode Set
mode. (p. 55)
4
[MODE] for 1
4
54