D Programming A Dtmf Code; D Dtmf Speed - Icom IC-7000 Instruction Manual

D
q Push [MODE] to select FM mode.
w Select S-1.
[MENU/GRP] for 1 second once or twice
to select the menu group S.
[MENU/GRP] momentarily one or more times
to select the menu S-1.
e Push [F-2 DTM] then [Z(
DTMF root menu.
)]. The DTMF starting menu can be
[Z( MENU / GRP
changed in the miscellaneous (others) Set mode. (see
p. 134)
r Push [F-2 EDT] to enter the DTMF edit menu.
t Push [F-1 D1] — [F-4 D4] to select the desired
DTMF memory channel.
y Select the desired code by rotating [DIAL].
[F-1 Å] or [F-2 Ç] for cursor movement.
[F-3 DEL] to delete the selected code.
u Repeat steps t and y until the desired contents
are input.
i Push [Z( )] to return to memory channel
MENU/GRP
selection mode, then select the next memory
channel and repeat steps t and u for code
input, if desired.
o Push [Z( )] twice to exit the keyer edit
MENU/GRP
mode.
D
The rate at which DTMF memories send individual
DTMF characters can be set to accommodate
operating needs.
q Select the DTMF root menu as described above.
w Push [F-4 SET] to enter the DTMF Set mode.
e Rotate [DIAL] to set the desired DTMF speed.
ms" is slowest.
[F-4 DEF] for 1 second to select the
default rate.
r Push [Z(
MENU/GRP
)] twice to exit the DTMF Set
mode and return to the normal FM mode display.
)] to select the
MENU/GRP
RECEIVE AND TRANSMIT
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
DTMF memory channel select
4
[DIAL]
4
Selected
code
68