Other Settings In General Setup Menu - Standard Horizon CP500 Owner's Manual

the following: CHART, CHART/COMPASS, CHART/HIGHWAY, NAVIGATION, HIGH-
WAY, CELESTIAL, GPS STATUS, DSC LOG, DSC DIRECTORY, NMEA DISPLAY, NMEA
DATA, DEPTH TREND, WIND SPEED TREND, TEMP TREND, SOG TREND, MARKS/
WAYPOINTS, USER C-CARD and VIDEO INPUT.
When the Optional FF520 50/200kHz BLACK BOX FISH FINDER is connected, any Soft
Key can be customized to show 50 or 200kHz full page, 50 or 200kHz Chart/Fish split screen
and zoom screens. Also when a SI-TEX RADAR Antenna is connected (USA only), any Soft
Key can be customized to show Radar pages, RADAR FULL, RADAR CHART, RADAR
OVERLAY and RADAR/FISH FINDER.
1. To change, momentarily press any of the Soft Keys, then press and hold the Soft Key
you want to customize.
2. A popup window will be shown with the above settings.
3. Move the ShuttlePoint knob up or down to select the desired page.
4. Press [ENT] or move the ShuttlePoint knob to the right to save the page to the selected
Soft Key.
3.7

OTHER SETTINGS IN GENERAL SETUP MENU

You will notice the GENERAL SETUP menu has other selections that allow you to customize:
TIME SETUP
DATE FORMAT
COURSE UP/NORTH UP
KEYPAD BEEP
UNITS OF MEASURE
NAV AIDS PRESENTATION Allows the Nav Aids presentation to be drawn using NOAA symbology when US is
DISPLAY COLOR
CP500
Figure 3.6 - Window options of the selected Soft Key
Selects a sub-menu to allow the time setup. It is possible to set the GPS Time Offset, choosing
the UTC or Local Time display, and the Time Format, switching 12 or 24 hours time format.
Allows choosing date format MM-DD-YY or DD-MM-YY.
Selections are North Up (the Top of the page is fixed to North) or Course Up (the top of
the page is orientated to the direction the vessel is heading).
Allows the beep produced when a key is pressed to be turned on or off.
Units of Measure can be selected for Distance, Speed, Depth, Altitude and Temperature.
selected or International symbols will be used when International is selected. When
selected these functions affect how the icons for Lights, Signals, Buoys and beacons are
displayed.
Changes the background colors of the chart page to enhance the visibility of the screen
depending on the surrounding light conditions. Selections are Normal (is recommended
when the GPS Chart Plotter is not exposed to the direct sunlight. When this mode is set
the maps are displayed in order to use colors as similar as possible to ones used in the
original paper charts), Classic (uses vivid chart colors presentation), NOAA (allows
setting NOAA paper chart colors presentation), Night is recommended when the
environment is dark in order to reduce the glare of the display. The GPS Chart Plotter
displays maps and screen in darker colors) and Sunlight (is designed to enhance the
visibility of the screen when the GPS Chart Plotter is exposed to sunlight. The maps are
much brighter than in the other modes and the depth areas are filled with the white color
so different depth areas are not easily distinguishable).
Page 29