Service Cases - Software - Siemens SINUMERIK 828D Service Manual

Service cases - software

Overview
The following software tools should be used for the subsequently described service activities
and to backup system and user data:
● Toolbox CD V2.6 SINUMERIK 828D with the following contents:
● RCS Commander V2.6 SP1
Backing up log files:
If system problems occur, then it is necessary to backup all of the existing log files in order to
provide these to the hotline for diagnostics. There is a special shortcut key for this function:
CTRL + ALT + D
This function generates a directory on the User CF card or on the front USB. If both are
available, then the directory is created in both storage media.
Example
The directory name has the following structure: LOG_Date_Time
LOG_091102_083615 stands for a directory generated on 02.11.2009 at 8:36:15.
This therefore ensures that a directory is not overwritten by pressing CTRL + ALT + D
several times. The directory contains all of the logbook and debug information available in
the system.
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0
– PLC Programming Tool for Integrated PLC
– Commissioning software for SINAMICS S120
– Recovery system
3
17