This Is How You Install An Smc30 - Siemens SINUMERIK 828D Service Manual

Service cases - hardware
4.11 SMC20 / SMC30
4. Slide the lug downwards.
5. Swivel the module to the front to remove it.
4.11.8

This is how you install an SMC30

Installing
Figure 4-29
Procedure:
1. Place the components on the mounting rail.
2. Then, swivel the components on the mounting rail so that the mounting catches click into
142
CAUTION
The 50 mm clearances above and below the components must be observed.
Installing SMC30
place at the rear.
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0