DIP switch S2
Figure 4-9
Switch S2 defines the IP address of the machine control panel:
1
on
For SINUMERIK 828D, the IP address = 192.168.214.64 must always be assigned to the MCP.
4.4.4
Status displays, MCP 483C PN
LED status displays
For the MCP 483C PN there are 3 LEDs in a row (H1 - H3), which provide information about
the module state:
Figure 4-10
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0
Switch S2
2
3
4
5
off
on
off
off
Status displays
6
7
8
9
on
off
off
off
Service cases - hardware
4.4 Machine control panels
10
Device name
on
mcp-pn64
93