This Is How You Load The User Data Backup - Siemens SINUMERIK 828D Service Manual

3.1.2

This is how you load the user data backup

NOTICE
If this function is activated, the actual system data is replaced by the data backup.
Procedure
Proceed as follows to load the internal data backup:
1. The following display is shown when booting after power-on:
2. To start the Setup menu , press the <SELECT> key.
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0
You now go to the Setup menu:
Service cases - software
3.1 Backing up user data
21