Service cases - hardware
4.13 DMC20
4.13.2
DMC20 connections
Connections
Figure 4-32
Connections DMC20
4.13.3
This is how you remove a DMC20
Overview
The activities that must be taken into account when replacing a DMC20 are subsequently
described.
If a DMC20 has a hardware defect, then it must be replaced by an identical module.
Preconditions:
● The module is defective and must be replaced.
● The control cabinet is in a no-voltage condition, all of the connectors and cables are
148
labeled.
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0