Siemens SINUMERIK 828D Service Manual page 67

4. In the following dialog box, select the configuration files:
5. To open a navigation window, press the "XML Upload" softkey.
6. Select the files of the machine identity that you wish to transfer to EUNA.
7. Now confirm using the softkey "Upload file ...".
8. After the upload, other files can also be uploaded.
9. If no other files are to be uploaded, press the softkey "continue >".
10. Complete the upload by pressing the "Save" softkey.
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0
During the upload, the files are checked and a log is displayed for each file that has been
transferred.
Note
Contact persons worldwide
If it was not possible to transfer the file, then please contact your local Siemens
officeContact (http://www.automation.siemens.com/partner) in sales.
Service cases - software
3.7 Enter the final end user data (EUNA)
67