Siemens SINUMERIK 828D Service Manual page 55

Preconditions
The following preconditions must be met in order to assign a license to a piece of hardware
via direct access and user interface:
● Hardware serial number
● A PC/PG with Internet connection and browser is available.
● The login data for direct access (e.g. per CoL (Certificate of License)) is available:
Generating a license key
Procedure:
1. Select the "Start-up" operating area.
2. Press the menu forward key.
3. Press the "Licenses" softkey.
4. Press the "Overview" softkey and note down the serial number of the system
5. At your PG/PC, establish a connection to the Web License Manager
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0
– License number
– Delivery note number
Note
Hardware serial number
Ensure that the serial number of the hardware displayed is the one you want to make
the assignment for. The assignment of a license to a piece of hardware cannot be
reversed via the Web License Manager .
CompactFlash Card.
(http://www.siemens.com/automation/license)
Service cases - software
3.6 Licensing
55