Siemens SINUMERIK 828D Service Manual page 41

2. Press the <SELECT> key, "Normal startup" is the default setting.
3. Now press the following keys in succession:
4. The setup menu is displayed:
5. Use the cursor keys to select the menu item "Install software update/backup".
6. Press the <INPUT> key to confirm your selection.
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0
Menu reset key, HSK2 (horizontal SK2), VSK2 (vertical SK2)
Service cases - software
3.4 Software update
41