Xerox phaser 3140 Service Manual page 72

Error Messages and Codes
3-12
Downloaded From ManualsPrinter.com Manuals
Paper Exit Sensor
Troubleshooting Reference Table
Applicable Parts
Fuser, PL9.0
Troubleshooting Procedure Table
Step Actions and Questions
1 Remove the Top Cover (page 8-23).
Go to step 2.
2 Clean the exit rollers.
Go to step 3.
3
Remove and disassemble the Fuser
(page 8-11).
Remove the jammed paper.
Go to step 4.
4 Clean the Fuser rollers.
Go to step 5.
5
Inspect the Fuser guide claws and
their associated springs.
Are any of the guide claws broken or
warped, or are any of the guide claw
springs missing or bent?
6 Clean the surface of the Pressure
Roller with a clean dry cloth.
Check the Exit Actuator for damage
and functionality, and then reinstall
the Fuser.
Does the problem persist?
Yes
Replace the
Fuser.
Replace the
Fuser.
Phaser 3140/3155/3160 Printer Service Manual
s3160-071
No
Go to step 6.
Complete.