Print-Quality Troubleshooting
Printing Begins at Wrong Position
Light or Undertone Print
5-10
Downloaded From ManualsPrinter.com Manuals
Printing begins at wrong position on the paper.
Troubleshooting Procedure Table
Step
Actions and Questions
1
Replace the Feed Sensor Actuator
(page 8-40).
The overall image density is too light. The Print Cartridge is at or near end of life,
Toner Save mode is On, or the high-voltage contacts between the Power Supply
and Print Cartridge are damaged or dirty.
Initial Actions
•
Check the Print Cartridge life count.
•
Agitate the Print Cartridge to redistribute the toner.
•
Set Toner Save mode to Off.
Troubleshooting Reference Table
Applicable Parts
Power Supply Board, PL1.0.1
Print Cartridge, PL1.0.12
Yes
Complete.
Example Print
Light or Undertone Print
Phaser 3140/3155/3160 Printer Service Manual
No